Description
This document contains the list of QNAP QTS version compatible with the OBM.
Important Note:
QNAP NAS models with less than 1GB RAM are not supported. As 1GB RAM or above is required to ensure application stability and optimal backup/restore performance. To backup data on unsupported QNAP NAS models, share the data then backup the data as network shared folder.
Contents
Supported QTS Version:
Hardware Requirement:
Supported QTS Version | |||
| QTS Version: | |||
| 4.1 | |||
| 4.2 | |||
| 4.3 | |||
| 4.4 | |||
| 4.5 | |||
| 5.0.0 | 9.3.0.0 or above | ||
| 5.0.1 | 9.3.2.72 or above | ||
| 5.1 | 9.7.0.0 or above | ||
| 5.1.1 | 9.7.2.0 or above | ||
Hardware Requirement:
Hardware Requirement | |||
| CPU: [2] | |||
| 64bit Dual Core architecture or above | |||
| [2] Due to the processing power required for compression, encryption, and delta generation. It is recommended the QNAP NAS should be installed with dual core CPU processors with sufficient memory. Intel CPU processor is recommended over other CPU processor type. | |||
| Memory: [3] | |||
| Minimum: 1024 MB Recommended: 2 GB or more | |||
| [3] The default Java heap size of OBM installation on QNAP NAS is 256 MB. 1 GB RAM or more is required to ensure application stability and optimal backup/restore performance. | |||
| Installation Space: | |||
| Minimum: 500 MB | |||
| Network Protocol: | |||
| TCP/IP | |||